Serving Bryan, TX and surrounding areas. (979) 359-2217
Bryan Concrete & Masonry is a masonry contractor serving Taylor, TX with walkway construction, brick repair, and concrete flatwork - we have been serving Williamson County homeowners since 2018 and respond to every new job inquiry within one business day.
Taylor properties in both the historic downtown neighborhoods and the newer subdivisions near the Samsung corridor often have cracked, uneven, or missing walkways after years of Blackland Prairie clay soil movement. Our walkway construction team accounts for Williamson County soil conditions from the start - proper base compaction and drainage planning before the first paver or form goes down - so the finished surface stays flat and safe rather than cracking within a few seasons.
A large share of Taylor homes built from the 1950s through the 1980s use brick veneer as the primary exterior finish, and many of those mortar joints are showing their age. The Williamson County climate - hot summers, occasional hard freezes, and active clay soil - widens small mortar cracks year by year. Catching them while the brick faces are still sound is significantly cheaper than waiting until water has worked its way behind the veneer and reached the framing.
Taylor sits in one of the fastest-growing counties in Texas, and that means homeowners are dealing with concrete work from multiple eras - original slabs from the 1950s alongside newer pours from the 1990s and 2000s. All of it is subject to the same Blackland Prairie clay cycle, and the results are similar: cracked driveways, uneven aprons, and sidewalk sections that have heaved or sunk. Proper base correction before the new concrete goes down is what separates a repair that lasts from one that cracks again within three years.
Older Taylor homes near the historic downtown square were often built on pier-and-beam foundations, while the newer subdivisions on the north and east sides of town use slab construction. Both foundation types are vulnerable to Williamson County clay movement, and the warning signs - doors that stick, floors that slope slightly, or cracks along interior trim lines - are worth taking seriously before the underlying masonry reaches a point where repair costs escalate.
Taylor properties with any grade change on the lot - including the larger parcels on the edges of town - often collect water against the foundation after heavy Central Texas spring rains. A masonry retaining wall redirects runoff, holds grade, and reduces the sustained soil moisture that accelerates clay shrink-swell movement and the foundation stress that comes with it.
Older Taylor homes near the historic downtown often have original brick chimneys that have not been serviced since they were built. Deteriorated mortar crowns, cracked chimney caps, and spalled brick at the top of the stack are common on homes from the 1940s through 1960s, and those failures let water into the flue. Left unaddressed, the moisture works its way into the ceiling framing before it becomes visible inside the house.
Taylor sits on the Blackland Prairie, where the clay soil swells with spring rain and shrinks back hard during the long Central Texas summer. That movement is relentless - it works on concrete and masonry year after year, and the cumulative effect is visible all over the city: cracked driveways, uneven sidewalks, mortar joints in brick veneer that have opened up over time, and foundation slabs with hairline fractures that grow steadily wider. For Taylor homes near the historic downtown that were built before 1950 - many on pier-and-beam foundations - that soil cycle has been acting on the structure for 70 or more years. The newer subdivisions going up near the Samsung semiconductor plant site are on newer slabs, but Williamson County clay does not spare new construction either.
The seasonal weather compounds the challenge. Central Texas spring storms bring hail and heavy rain, and Williamson County sees hard freezes several times each winter. The freeze events that hit the region in February 2021 damaged a significant number of older Taylor homes, cracking concrete flatwork and forcing water into masonry gaps that had been holding. Summer heat - with stretches above 95°F from June through September - bakes roofing materials and dries out mortar and caulk joints that were holding moisture. A contractor working in Taylor needs to understand how those seasonal swings interact with the local soil and housing stock to give accurate repair recommendations.
Our crew works throughout Taylor regularly, and we understand the local conditions that affect masonry contractor work here. Taylor is a city in transition - historic blocks near the downtown square with homes dating to the railroad era sit alongside newer subdivisions that have gone up as Williamson County has grown into one of the fastest-expanding counties in the country. That mix means our crews encounter pier-and-beam homes with original brick and mortar on one job and a 2018 slab-foundation house with brick veneer and settling driveway apron on the next.
The area around Murphy Park and the neighborhoods within a few blocks of the historic downtown square tend to have the oldest housing stock - homes built from the 1910s through the 1950s where original masonry has been exposed to Williamson County weather for generations. The growth corridors on the north and east sides of town near US-79 and SH-95 have newer construction, often with larger lots and longer concrete driveways that are just beginning to show the effects of clay soil movement. The City of Taylor Development Services office handles building permits and inspections for work within city limits, and we coordinate directly with them when a project requires permitting.
We also serve the areas surrounding Taylor, including Waco, TX and Rockdale, TX, where similar clay soil conditions and housing stock create the same range of masonry needs.
Call us or fill out the estimate form and we will follow up within one business day. You do not need to diagnose the problem before you reach out - describing what you see is enough to get started.
We come to your Taylor property, assess the masonry or concrete condition, and give you a written estimate before any work begins. There is no charge for the estimate, and we will explain what we found and what we recommend so you can make an informed decision without feeling pressured.
We schedule the job at a time that works for you and handle all permitting with the City of Taylor when required. On clay soil projects, base preparation and drainage correction happen before any surface work, which is how we make sure the finished product holds.
When the work is done we walk the site with you, answer any questions, and make sure you are satisfied before we pack up. If anything needs adjustment, we address it before we leave.
We serve Taylor and all of Williamson County. No pressure, no obligation - just an honest assessment and a written estimate.
(979) 359-2217Taylor is a city of around 17,000 people in Williamson County, situated about 35 miles northeast of Austin along US-79. The city grew up around the railroad in the late 1800s, and its historic downtown square - with commercial buildings and residential blocks dating to that era - remains the geographic and cultural center of the community. Taylor is best known outside Williamson County for the Taylor International Barbeque Cookoff, held every August and drawing thousands of visitors each year. The housing stock near the downtown core is predominantly older single-family homes - many built before 1950 - with brick veneer or wood frame exteriors and a mix of pier-and-beam and early slab foundations.
Williamson County is one of the fastest-growing counties in the country, and Taylor is changing alongside it. The Samsung semiconductor plant being built on the edge of town has drawn significant attention and is expected to bring thousands of new residents to the area, accelerating new home construction on the north and east sides of the city. Those newer subdivisions sit alongside the older established neighborhoods, creating a housing stock that ranges from century-old homes near the historic core to brand-new builds. Contractors serving Taylor need to be equally comfortable with original masonry from the 1920s and freshly poured concrete from last year. We also serve homeowners in nearby Waco, TX and Cameron, TX, where many of the same soil and housing conditions apply.
Repair cracked, chipped, or missing bricks to restore strength and appearance.
Learn MoreBuild strong retaining walls that control erosion and shape your landscape.
Learn MoreRevive aging or damaged masonry structures to their original condition.
Learn MoreInstall a custom masonry fireplace that adds warmth and lasting value.
Learn MoreAdd natural stone veneer for a beautiful, low-maintenance exterior finish.
Learn MoreConstruct solid concrete block walls for privacy, security, and durability.
Learn MoreBuild reliable block foundation walls engineered for long-term stability.
Learn MoreCreate a custom masonry outdoor kitchen built to entertain and endure.
Learn MoreInstall handsome brick walls that define spaces and add lasting character.
Learn MoreTaylor homeowners get a free written estimate - call or request one online and we will follow up within one business day.
